5 Great Maverick X3 Products For Under $300
The Lone Star Racing Quick Shift Race Plate will go over the factory shift gate and allow you to quickly shift between HI/LO and HI/REVERSE. The shift plate is made from stainless steel and bolts into place for a secure fit. The kit comes with a billet aluminum LSR shift knob. www.lsracing.com 1(800) 4LS-RACE.
The modification includes CNC machine all 4 of your clutch sheaves so they’re perfectly true and straight plus the KWI float spring, spacer, shims, and complete instructions.
They will disassemble and inspect your clutches and advise of any damage Repair if necessary after approval. Then install WKP upgraded rollers that are MUCH stronger than anything on the market today. Next, CNC machine your helix with our Race Helix angles. Finally, clean, service and reassemble your clutch so it’s ready to bolt-on and go. Call (815) 216-6000. www.kwiclutching.com
The Assault Industries radius rod double shear bracket kit resolves what has become a common problem for all Can Am Maverick X3 models. Premature wear of the center radius rod hole on the knuckle can cause undesirable behavior while driving.
The hole can become oblong in shape, altering the toe angle which can lead to the dragging of the rear wheels, excessive tire wear, damage to other components or the total shearing off of the bolt. A sheared bolt can allow full toe angle articulation of the affected wheel(s) – this can make the vehicle impossible to control and damage other parts.
**If the knuckle is already damaged, It is recommended that the knuckled be replaced with a new OEM replacement unit prior to the install of this product.**
**XDS models require minor modifications to work properly. Contact Assault at (714) 799-6711 for more information or online you can visit www.assaultind.com
This product serves a great purpose to protect the housing when the belt shreds or fails. It’s made from 1/16″ thick light weight aluminum and is tig welded. The one-piece design allows installation without removing the clutches in minutes with hardware supplied. Two holes have to be drilled and that’s it. Made In the heartland of the USA, Cleveland Ohio. Buy at www.extrememetalproducts.com or call (216) 267-3900.
Save your undercarriage and tackle more difficult trails with a 3” Lift Kit from SuperATV. It measures true to size, so you get three more inches of ground clearance and enough tire clearance for up to 29.5” tires on 64” models and up to 32” tires on 72” models. You’ll clear more downed trees and massive boulders without issues. Plus you can stick bigger tires on there and get even more ground clearance for even wilder rides. The simple shock spacers are made of high-strength billet aluminum to make sure they last for years. Plus they have a lifetime warranty.
Buy at www.superatv.com or call them directly to purchase over the phone at (855) 574-7777.