AXIAL RACING YETI JR. CAN-AM X3 RC CAR

1/10 Scale-Full Size Fun

The $149.99 Axial Yeti Jr™ RTR takes everything you admire about the 1/10 scale Yeti chassis and shrinks it down to 1/18 scale — then tops it off with a licensed Can Am® Maverick X3 body for a fun 4WD that anyone can handle. Out of the box, this tiny terror is ready for scale adventures!

 

Before we unveiled the Yeti, the only place to find an independent suspension with floating solid rear axle was in full-size off-road vehicles. Axial carried its advantages over into RC rock racers and crawlers. The suspension design give the Yeti Jr responsive handling, increased clearance, and improved stability at high speeds. Its included 380-size 37T motor adds the perfect amount of speed and torque. When that muscle meets the tread of the Maxxis® Bighorn 2.0 radial tires, you’ve got all the traction you need for fast, smooth rides over virtually any surface.

SPEKTRUM STX2 TRANSMITTER
The STX2 2-channel radio system offers many features of higher-end 2.4GHz radio systems like throttle/steering reversing, throttle/steering travel adjust & throttle limiting.

• Built-in 3-position throttle limiter

• Steering & throttle rate & trim adjustments with throttle and steering reversing

• FHSS 2.4GHz protocol offers extended range and interference free performance

• AA batteries included

SPEKTRUM ESC/RECEIVER COMBO
The Spektrum ESC/receiver is an all in one unit featuring an EC3 battery connector, a convenient on–off switch and it’s water resistant for peace of mind when water splashes on your electronics. 

37T BRUSHED ELECTRIC MOTOR
Delivering an even balance of speed and technical adventuring, the Dynamite Tazer 380 37T motor features a worry-free design with enlarged cooling ports for extended periods of use. The motor is paired with a 15T pinion and 60T spur gear for extra speed!

• 37T, 380 size motor

• Waterproof

AR18 SOLID REAR AXLE
To help keep the scale premise in check, simply shrinking down an existing axle was just not an option. In keeping the proportions correct along with yielding ample terrain clearance a new axle was designed, the AR18. Features include a compact two-piece design, captured pinion gear, and three-linked rear suspension with integrated sway-bar like support design for improved handling.

Rear suspension features:

• 8mm axle with 12mm hex adapter

• Open diff

• 61mm-90mm 7mm diameter shocks with 3mm shocks shafts

• Multiple shock mounting positions

ADJUSTABLE COILOVER SHOCKS
The threaded shock bodies hold a single coilover spring. They are oil filled and allow you to tune the dampening rate.

• 46mm-63mm 7mm diameter front shocks

• 61mm-90mm 7mm diameter rear shocks

• 3mm shock shafts

THREE-LINKED REAR SUSPENSION
The Yeti Jr.™ features a three-linked rear suspension design with integrated sway-bar like support for improved handling. The rear axle has upper and lower mounting points for the trailing arm, allowing you to fine tune your suspension setup.

INDEPENDENT FRONT SUSPENSION
The Yeti™ Jr. is equipped with an Independent Front Suspension (IFS) system to help maintain high-speed stability when running through a diverse range of terrain. The IFS system allows you to better control the intended direction of travel at high speeds when one side is adjusting to overcome road obstructions. The stability that the IFS front end provides is paramount for off road racing.

Front suspension features:

• Machined aluminum CVD’s

• 8mm axle with 12mm hex adapter

• Open diff

• 2.50mm hingepins

• 46mm-63mm 7mm diameter shocks with 3mm shocks shafts

• Multiple shock mounting positions

Find a dealer at http://www.axialracing.com/

You might also like

Comments are closed.