We are working on a killer Honda Talon 3X build for an upcoming issue. As we have been tearing it apart and reassembling the pieces, we have taken note of exactly what tools are required to work on it. Feel free to use our Honda Talon Toolkit list; however, keep in mind that if you changed or added anything from stock, double check which fasteners are used for those parts so you can properly build your own toolkit.
Here’s what it take to make your own Honda Talon Toolkit
4mm: Exhaust hanger
5mm: Window nets, seats, rocker panels, bumper, dash, air filter
6mm: Engine, doors, bodywork, brake rotors
Phillips: Doors, hose clamps, throttle body
SOCKETS & WRENCHES:
6mm: Hose clamps
8mm: Front diff, oil fill, timing chain adjuster
10mm: Body hangers, oil fill, oil drain, brake lines, battery box, steering, exhaust, engine, starter motor, throttle body, skid plates, shifter
12mm: Front diff, rear diff, brakes, seats, pedal assembly, door latch, exhaust, bumper, steering
14mm: Differentials, engine mount, brake line, sway bar mount, tie-rod ends
16mm: Seat belts
17mm: Trailing arms, shocks, A-arms, radius rods, sway bar, tie-rods, O2 sensor
19mm: Lug nuts, tie-rods, ball joints
30mm: Axle nuts
Pliers: Cotter pins
Pushpin pliers: Push pins
Stock toolkit: Spark plug
To see what tools you need for other machines click on the name below.
To read more helpful articles like this, you can subscribe to UTV Action Magazine HERE.