STREET-LEGAL KIT BUYER’S GUIDE

— UTVs in the McDonald’s drive-thru lane —

Off-road riding is where the fun is, but sometimes you have to travel paved roads to reach it. Our “Street-Legal Kit Buyer’s Guide” gives you all the important details on kits that can equip your UTV to be street-legal.

Warning: Most UTVs are designed for off-road use. Use UTVs on paved roads at your own risk and only where laws allow it. Check laws in your area to be sure your machine is properly equipped.

ADVANCE MCS ELECTRONICS UTV TURN SIGNAL KIT

This kit contains the equipment required by most states to make a UTV street-legal.

You get:

—Heavy-duty lever switch with four-way flasher feature

—Adjustable flasher relay

—Horn and lighted button

—4 amber-colored LEDs

—License plate light and install kit complete with wire and connectors.

Fits: Most popular UTVs

Price: $120

Get it from: Advanced Electronics; www.advancemcs.com/go/storeitem.html?cfgridkey=60557, amazon.com

 

CORBIN CUSTOM WORKS PLUG-AND-PLAY TURN SIGNAL KIT

This easy-to-install kit uses your OEM taillights as turn signals and adds a total of four amber lights to the front. Plugs into factory wiring and connectors with no cutting or splicing of wires. Everything was designed to handle anything you put your machine through, like the weather-sealed wire connectors  and submersible control module. Back-lit rocker control switch with directional arrows on control switch flash to indicate chosen direction.

You get:

—Handmade wire harness made specifically for your machine with wiring to utilize the stock taillight assemblies as turn signals.

—Front LED turn signal lights (bright amber when illuminated).

—Backlit rocker control switch

—Electronic flasher

—Horn

—Detailed instructions

Fits: 2014, 2015, 2016, 2017 and 2018 Polaris RZR S/900/1000/Turbo/Turbo S/Dynamix models, General, Ranger. Can-Am Commander, Maverick X3 and Defender.

Price: $250–$280

Get it from: Corbin Custom Works, www.corbincustomworks.com/products/turn-signal-kit-for-2015-2016-polaris-rzr-900-1000-turbo?variant=24869065219&gclid=eaiaiqobchmi7prl5cxb2givbbxach0laq-ieaqybsabegjvdpd_bwe

CUSTOM DYNAMICS LED TURN SIGNAL KIT

Custom Dynamics’ LED turn signal kit works on all UTVs with 12-volt DC electrical systems.

You get:

—Four 1.25-inch amber LED turn signals

—Four-way hazard flasher and switch

—Turn signal flasher and switch

—Two green LED turn signal indicators

—Complete easy-to-install wiring harness with fuse and switches

Fits: Most popular UTVs

Price: $180

Get it from: Your Parts Unlimited dealer

DRAGONFIRE UNIVERSAL ROAD READY KIT

DragonFire’s Road Ready kit contains the essentials you need to equip your UTV for road use.

You get:

—Horn

—Mirror with mounting clamp that accommodates 1.5–2-inch tube diameter

—Lighted license plate mount

—Hardware

—Wiring

Fits: Most popular UTVs

Price: $100

Get it from: Chaparral, www.chaparral-racing.com; Dragonfire,www.dragonfireracing.com/product/1017/universal-road-ready-kit

DUX PLUG & PLAY SIGNAL KIT

The Dux Plug & Play turn signal/horn kit is easy to install and is 100 percent plug-and-play. When installed according to the instructions, all the wires end up in all the right places and everything simply plugs in—the turn switch and turn lights, the horn and horn button, and the flasher. All the wires have labels and are color-coded so you can get it right the first time—no special skills needed. Make your machine safer for road use, fast and easy!

You get:

—Turn signal switch

—Horn switch

—Turn signal lights

—Electronic flasher

—Horn

—Complete wire harness with connectors installed.

Fits: Most popular UTVs

Price: $220–$330

Get it from: Rocky Mountain ATV/MC, www.rockymountainatvmc.com; Chaparral, www.chaparralracing.com; SuperATV, www.superatv.com

RYCO MOTO LIGHTING KIT

Ryco’s UTV lighting kits are designed to plug into existing wiring and includes detailed instructions and all the equipment required by most states.

You get:

—Wiring to utilize the stock taillight assemblies as turn
signals for a clean factory appearance

—Combination turn signal and horn switch with mounting bracket. Horn button is located on the end of the turn signal switch shaft

—Front LED turn signal lights (bright amber when
illuminated)

—Electronic flasher

—114-decibel horn

—Complete wire harnesses cut to proper lengths with factory-type connectors installed

—White LED license plate light

—License plate mounting hardware

—All necessary hardware, wire ties and connectors

Fits: Most popular UTVs

Price: $290

Get it from: Rocky Mountain ATV/MC

RYCO RZR XP TURBO S/S4 STREET-LEGAL KIT

-Fits 2018-2019 RZR Turbo S/S4, 2019 RZR XP/XP4 1000s and Turbos

– Military Grade wiring harnesses and connectors

– Includes new White/Orange front LEDs to replace OEM LEDs and Blanks

– Wiring harnesses plug into rear tail/brake lights

– Turn signal/emergency flasher control, flash module, power/ground/harness with fuse plugs into accessory bung

– License plate light, harness and bracket

– Indicator harness with connector pins to digital and analog dashes

– MSRP $380 with front LEDs

– Contact Ryco Motorsports (801) 643-3440, available at Rocky Mountain ATV/MC soon

SUPER ATV UTV/ATV PLUG & PLAY TURN SIGNAL KIT

SuperATV has UTV-model-specific turn Signal kits for most popular UTVs and a universal kit. They are designed to be complete and easy to install. The wiring harness is color-coded and pre-assembled as much as possible. The wiring is simple enough that anybody at any skill level can get it hooked up. From the taillights to the front indicators to the dash cluster, it really is plug-and-play.

This kit also includes a compact 105-decibel horn to make sure you are safe on the road. This kit includes an LED dash cluster indicator for the standard kit and an LED indicator on the steering column stalk for the deluxe version. That way you always know when your signal is on.

You get:

Deluxe kit includes:

—Steering column turn signal stalk with horn button and mounting hardware

—2 front LED turn signal lights

—2 rear LED turn signal lights

—1 compact 105-decibel horn

—1 horn button

—Completely assembled and color-coded wiring harness with connectors

—10 wire ties

Standard kit includes:

—Dash-mounted turn signal toggle switch

—2 front LED turn signal lights

—2 rear LED turn signal lights

—1 LED dash cluster indicator

—1 compact horn with horn button

—Completely assembled and color-coded wiring harness

—10 wire ties

Price: Deluxe kit, $200-$220; standard kit, $185–$190.

Get it from: SuperATV.com, www.superatv.com/utv-atv-universal-turn-signal-kit?gclid=eaiaiqobchmi7prl5cxb2givbbxach0laq-ieaqyaiabegjxivd_bwe

STARTING LINE PRODUCTS STREET LEGAL KIT

This universal street-legal kit contains all the signal and lighting equipment most states require to make UTVs legal for road use.

You get:

—4 small LED Ultra-Bright lights, 3/4-inch diameter with panel mounting grommet

—Toggle-type turn signal switch

—Signal flasher

—Signal indicators

—30-decibel horn

—Horn button

—License plate mounting bracket and lighting

—Wire

—Fuses, fuse holders and all needed connectors

—Detailed instructions.

Fits: Most popular UTVs

Price: $240

Get it from: www.startinglineproducts.com/catalog.cfmpageid=detail&catalogid=1&catid=135&productid=3024

TUSK UTV HORN & SIGNAL KIT WITH MIRRORS

The Tusk UTV horn & signal kit is designed to be a simple way to provide front and rear turn signals, horn, license mount, and rear-view mirrors for your UTV. The Tusk kit is easy to install with a few common tools. The components have universal applications and will work on almost any UTV.

You get:

—2 rear-view mirrors

—Turn signal switch

—Horn switch

—Turn signal lights

—Electronic flasher

—Horn

—License mount

—Complete wire harness with connectors installed.

Fits: Most popular UTVs

Price: $170

Get it from: Rocky Mountain ATV/MC, www.rockymountainatvmc.com

XTC™ Power Products has UTV Wiring Solutions. Their Plug & Play™ Product line offers the TSS-Turn Signal System (Patent Pending). The system comes with a Marine Switch that activates the Turn Signal System and also Indicates with a flashing arrow. It is Easy to install with no wires to cut and no crimping. The UTV TURN SIGNAL SYSTEM comes with pre-made wire harnesses that interface with the OEM harness, just unplug the car’s rear light harness connector and plug XTC’s harness in, it is that easy.

The brake lights work as turn signals just like a car including Hazard Lights. It includes a lit Hazard Switch and rear power out for the license plate light or whip light. XTC Power Products are made in America.  XTC™ Gets You Wired For Fun™!  They have turn signal kits for most RZR’s the Ranger XP 1000 and 900, the General, Yamahas, Can-Am’s X3 and Defender and Honda Pioneers along with a universal kit starting at $329.99.

You might also like

Comments are closed.