POLARIS FLEECE-LINED YOUTH HOODIE

POLARIS FLEECE-LINED YOUTH HOODIE

Get your young riders geared up for comfort even on cold, breezy rides with the Polaris fleece-lined youth hoodie. The kids’ Polaris sweatshirt is made with Spandex for flexible movement for those that like to stay active, and the fleece-lined hoodie is cozy on and off the trail. It’s available in red/black, blue/black or maroon/orange for $39.99 from your Polaris dealer or https://atv.polaris.com.

 

SEDONA TRAIL SAW

The Sedona Trail Saw is a highly puncture-resistant 8-ply all-terrain tire designed for the widest possible range of conditions—from the west’s deserts to East Coast woods. Aggressive tread spacing with 18mm-deep tread provides consistent traction and quick clean-out. Crown radius tread profile and radial construction provide predictable steering. It’s available in sizes from 28x10R12 to 35x10R14 and pricing ranges from $205–$275. Contact www.sedonatires.com.

See UTV Action’s full test on the Sedona Mud Rebel RT here: SEDONA MUD REBEL RT – UTV Action Magazine

 

DEMON HEAVY DUTY BALL JOINTS

Demon Powersports’ new heavy-duty ATV/UTV ball joints are stronger, bigger and beefier than stock ball joints. Not just larger than stock, Demon Powersports’ new heavy-duty ball joints are entirely made from 4340 chromoly steel material, which is twice as strong as common steel yet lighter than the material used for stock parts. These superior parts are greaseable and adjustable to offer longer life and resist severe impact failure better than original parts, making them better for any terrain and riding style. They’re covered by a one-year warranty. Demon Powersports’ heavy-duty ATV/UTV ball joints are available for most popular UTVs and ATVs. Prices range from $72 to $80. Contact Demon Powersports through www.demonpowersports.com or call (855) 373-4685

 

CYLINDER WORKS POLARIS 900/1000 HEAD STUD BOLT KIT

Did you know that Polaris cylinder studs are torque-to-yield one-time-use parts? Cylinder Works has a multiple-use cylinder-head stud-bolt kit for 900–1000cc RZRs, Generals and Rangers (2012–2022) that allow multiple disassembly and assembly cycles without buying new studs each time. Each kit includes six stud bolts, six nuts, six washers and two side cylinder bolts that are constructed of high-strength steel that allow higher torque and less chance of head-gasket leaks or failure. A black-oxide coating provides corrosion and rust resistance. MSRP is $69.95. See [email protected]allsracinggroup.com or your All Balls dealer.

 

MOOSE RACING SOUND BARS

Moose Racing introduces new sound bars for UTVs. Moose sound bars have integrated amplifiers specifically for powersports that deliver 30 percent more SPL than standard amplifier technology. Standard features are Bluetooth audio streaming, 3.5mm stereo auxiliary jack, and Memory Sync remembers the most recently attached device and automatically reconnects to it. A marine-grade chassis constructed of extruded aluminum and a perforated grill offer maximum protection from the elements, bumps and impacts. Moose sound bars come in three sizes with MSRPs of $349.95 to $459.95. Check them out at your Moose dealer or www.mooseracing.com.

 

WORX NITRO 20-VOLT IMPACT WRENCH

Looking for a compact, lightweight impact wrench for your UTV? The new Worx 20-volt brushless impact wrench with 1/2-inch drive has 25 percent more power than a brushed motor, and it runs 50 percent longer. The Worx Nitro has three no-load speeds. Maximum torque is 2664 inch-pounds, and it delivers 3600 impacts per minute for stubborn bolts and lugs. Speed, impact and torque ranges are selected through a digital keypad, and the keypad’s fourth setting is for driving screws. Weight with battery is only 3.4 pounds, and the Nitro also has a light for night work, which stays on an extra 20 seconds once the trigger is released. The 20-volt battery is compatible with 75 other Worx DIY products. The Nitro brushless impact wrench retails for $159.99 with battery and charger, or $99.99 without them. Get it at Lowe’s, Home Depot or Amazon.

 

METHOD 413 BEADLOCK WHEELS

Method Wheels unleashes the 413 beadlock with forged 6061 aluminum and T6 heat-treating, and the bead-lock ring is also forged 6061 V.7 with machining to reduce weight. Reinforced inner lip provides strength and durability, and the wheel and beadlock are designed to shed sand and debris. Grade 8 zinc-plated bolts secure the beadlock ring. Method says the 15×7 weighs 14.9 pounds and the 15×10 weighs 17 pounds, both of which are 5 pounds lighter than comparable wheels. The 15×7 and 15×10 413s are rated at 1600 pounds. MSRP is $750 each. See your Method dealer or www.methodracewheels.com.

 

ZBROZ PRO MAX LOWER A-ARM KIT

Available for Polaris, the Zbroz Racing Pro Max Series lower A-arms are built from 1.5-inch OD chromoly DOM tubing with a swaged end and pre-installed greaseable brass bushings. They are lighter, much stronger and offer more clearance than OEM A-arms. These direct-replacement parts are easy to install, with no modifications necessary and use OEM ball joints. A durable powdercoated finish assures lasting good looks. Does not fit Can-Am Smart-Shox models. They’re available for Polaris RZR XP 1000, RZR Turbo S, Can-Am X3 rs and X3 ds. MSRP is $650–$1199. Get them from www.zbrozracing.com.