POLARIS GENERAL SKID PLATE PROBLEMS

POLARIS GENERAL SKID PLATE PROBLEMS

POLARIS GENERAL SKID PLATE PROBLEMS

Dear Sarge,

I have a Polaris General 4 and I am afraid she has taken a few too many hits to the front lower A-arm bracket mounts. The tabs are a bit bent and oblong. I wanted to install a SuperATV Frame Stiffener to fix the A-arm mounting holes but I can’t get it to fit with my Factory UTV UHMW full length skid plate. FYI: SuperATV doesn’t make a General skid that would probably fit.

Ted Cook

Matewan, West Virginia

Private Porkchop, your Zooter’s skid plate is UHMW, Ultra High Molecular Weight Plastic, MODIFY the plastic to fit, maybe drill and tap some holes in the SuperATV Frame Stiffener. If you can’t manage that Boot, mark the Frame Stiffener and take it to a machine shop and have them do it. “Adapt and Overcome”  your Polaris General skid plate problems Boot! Remember you can make anything fit anything if you have a big enough hammer! Laugh Boot! Also SuperATV is always available to help at (855) 743-3427 or [email protected] After I wrote the above, I got to thinking, are you sure SuperATV doesn’t make a skidplate for the General 4? While not listed, they did build a skidplate for Easton Corbin’s Zooter here: https://www.superatv.com/easton_corbin_custom_build. So definitely contact SuperATV and demand one for your Zooter too! I mean what’s the difference between you and Easton, other than you can’t sing and aren’t famous? Laugh again Boot! I have signed you up for another go round of BRC, Phases 1 & 2! Dismissed!

See UTV Action’s full test on the General XP 4 1000 here: POLARIS GENERAL XP 4 1000 TROY LEE DESIGNS EDITION – UTV Action Magazine

Comments are closed.

edit